Land Rover Series II and IIA Specification Guide

Synopsis

The Series II [1958-61] and Series IIA [1961-71] Land Rovers defined the iconic shape of the vehicle which is still instantly recognizable in today's utility models from Land Rover. Compiled over nearly thirty years, with the aid of reference material produced by Land Rover and many dedicated enthusiasts, this comprehensive guide to the specifications of the Series II and IIA vehicles looks not only at Land Rovers as they were when they left the assembly lines but also at dozens of options and 'approved' special conversions - and some which did not receive factory approval, too. As one of the most wide-ranging books ever written on the classic Land Rovers, it is certain to become the standard reference guide to authenticity on the Series II and IIA models.

Summary

Chapter 1: Engine Specifications

* Overview: Provides detailed specifications for all Series II and IIA engines, including displacement, power output, torque, compression ratio, and more.
* Example: The 2.6-liter petrol engine had a displacement of 2625cc, produced 86hp at 4000rpm, and had a compression ratio of 8.0:1.

Chapter 2: Transmission Specifications

* Overview: Covers the various transmission options for Series II and IIA models, including manual, automatic, and transfer boxes.
* Example: The Series IIA offered a 4-speed manual transmission with synchromesh on all gears except first, while the Series II had a 3-speed manual transmission.

Chapter 3: Steering System Specifications

* Overview: Details the steering system components, including steering boxes, steering arms, and linkage.
* Example: The Series II and IIA used a recirculating ball steering system, with a gear ratio of 17:1.

Chapter 4: Suspension System Specifications

* Overview: Covers the suspension components, including springs, shock absorbers, and linkages.
* Example: The Series II and IIA used a leaf spring suspension system, with semi-elliptical leaf springs at the front and rear.

Chapter 5: Brake System Specifications

* Overview: Provides specifications for the brake system components, including master cylinders, brakes, and brake lines.
* Example: The Series II and IIA used a hydraulic brake system, with disc brakes at the front and drum brakes at the rear.

Chapter 6: Electrical System Specifications

* Overview: Details the electrical system components, including batteries, generators, and wiring harness.
* Example: The Series II and IIA used a 12-volt electrical system, with a 60-amp alternator.

Chapter 7: Frame and Body Specifications

* Overview: Covers the frame and body construction, including dimensions, materials, and body panels.
* Example: The Series II and IIA had a ladder-frame chassis, with a galvanized steel body.

Chapter 8: Axles and Wheels Specifications

* Overview: Provides specifications for the axles, wheels, and tires.
* Example: The Series II and IIA had solid axles with semi-floating hubs, and could be equipped with a variety of wheel and tire sizes.

Chapter 9: Dimensions and Capacities Specifications

* Overview: Includes information on overall dimensions, fuel tank capacity, and other relevant measurements.
* Example: The Series II and IIA had an overall length of 154.5 inches and a wheelbase of 88 inches.